Product ID:W1060 RG45
MSDS Date:07/12/1990
FSC:3439
NIIN:01-122-7447
MSDS Number: BYFGB

Emergency Phone: 704-739-6421

Info Phone: 704-739-6421

Cage: 0AES5

Cage: 0AES5

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES THROUG INHALATION:
DIZZINESS, NAUSEA, DRYNESS OR IRRITATION OF NOSE, THROAT OR EYES.
CHRONIC: SIDEROSIS. ARC RAYS CAN INJURE EYES & BURN SKIN. HEAT
RAYS: BURN EYES. ELECTRICAL SHOCK: CAN KILL. NOISE: DAMAGE
HEARING.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALATION: NAUSEA, DIZZINESS, DRYNESS OF NOSE
AND THROAT, COUGHING, WHEEZING AND SHORTNESS OF BREATH. EYES:
REDNESS, TEARING, BLURRED VISION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:CALL FOR MEDICAL AID. EMPLOY FIRST AID MEASURES RECOMMENDED
BY AMERICAN RED CROSS. IF BREATHING DIFFICULT, GIVE OXYGEN. CALL A
PHYSICIAN. ELECTRICAL SHOCK: DISCONNECT EQUIPMENT. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. NO PULSE-GIVE CPR. CALL A
PHYSICIAN. ARC BURN: CALL A PHYSICIAN.

Extinguishing Media:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: USE MEDIA
APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: WEAR
SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NON-FLAMMABLE; BUT SPARKS AND WELDING ARC
MAY IGNITE COMBUSTIBLES DURING USE.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER. DLA-HMIS: PICK
UP RODS. SWEEP UP OR MOP. PLACE RESIDUE IN A CONTAINER FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
DLA-HMIS: REMOVE ANY COMBUSTIBLES FROM WORK AREA: SPARKS OR WELDING
ARC COULD IGNITE NEARBY COMBUSTIBLES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR WELDING
FUMES OR SUPPLIED AIR RESPIRATOR IN CONFINED SPACES OR WHERE FUME
CONCENTRATION EXCEEDS REGULATORY LIMITS.
Ventilation:USE MECHANICAL OR LOCAL EXHAUST OR BOTH TO MAINTAIN LEVELS
OF FUMES BELOW REGULATORY LIMITS.
Protective Gloves:WELDERS WORK GLOVES
Eye Protection:WELDERS HELMET WITH CORRECT LENSES
Other Protective Equipment:CLOTHING TO PROTECT ENTIRE BODY FROM SPARKS.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:COPPER COATED OR BARE SOLID STEEL WIRE OR RODS.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES CANNOT BE CLASSIFIED
SIMPLY. COMPOSITION & QUANTITY OF BOTH ARE DEPENDENT ON METAL BEING
WELDED & PROCESS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.